|
| |
     
Computer Conversions Corporation over 30 years engaged in the design,
manufacture, and sale of resolver / synchro / lvdt converters for Industrial,
Military, and commercial concerns. Broadest line of isolated converters in the
marketplace, resolvers, geared resolvers, rotary Absolute Encoders and readouts,
Incremental and Absolute Encoders, Programmable Limit Switch Controls, and an
entire line of VME, ISA, PC104, STD bus compliant isolated converter modules,
and cards. Quality assurance program conforms to MIL-I-45208. Specialty high
reliable position feedback sensors and interface, absolute position retrofits,
environmentally tolerant, heavy duty and explosion proof position sensors, and
Multiturn Absolute Encoders. Bentech
is distributor in Taiwan
同步器 解角器 同步解角器轉換 同步器與解角器轉換 同步器轉數位訊號 同步放大器
 |
HSDC/HRDC Series
Isolated Synchro/Resolver to digital converters with built-in test and
force test |
Synchro - Resolver - Ac LVDT I/O
 |
STD BUS One to 2 Channel cards, any
function per card.
Lowest cost I/O bus.
I/O and Memory addressing, Expanded addressing supported.
High/Low Byte priority selectable.
Double Buffered Outputs.
Terminal Blocks or Mil spec. connectors on I/O. |
 |
Multispeed High Accuracy Angle Indicators
Input: 11.8V/90V rms.
L-L, 47 to 10,000 Hz
Ref.: 26V/115V rms. & 115V 60 Hz power.
Speed Ratio: 1, 8, 10,
16, 18, 32, 36, 64 &128.
Output: 5 or 6 digit .5" LED display (uni-polar or bipolar) & 5 or 6
digit BCD digital data (optional). |
Accuracy: +-.002, +-.005,
or +-.01 degree.
Package: a: 9.5" x 8"
x 2" H. b: 19" x 12" x 3.5" H.
Options: Choice of
scale factor, other speed ratios, watchdog timer, tristate, binary and
BCD output data simultaneously, dimmer. |
 |
Programmable Limit Switch - Series PLS1000
Input: Single,
Multiturn or Linear Resolver.
Resolution: Field
Scalable to 1 part in 4096/turn.
Outputs: 16 & 1 fault,
field select TTL or DC to 50V, Solid State and Electromechanical relay
boards.
Display: 8 character
and status LEDs
Speed: 5 us throuput
fully loaded, 3000 RPM. |
Functions: Hi/Low set
points, dwells, timers, tach, cycle count, RS232 I/O, force outputs,
offsets, 5 speed advance.
Memory: Nonvolatile
EEPROM 10-100 programs, serial buffer.
Size: 7.4"x6.2"x4.5"
panel mount or 14"x12"x10" Nema 13. |
 |
Shaft Tracker™ Absolute & Incremental
Outputs. No External
Electronics, Ultra-Reliable electromagnetic encoder with Real-Time
Incremental Quadrature Square & Serial/Shifted Absolute Position Data
in one. Resolution: 1024-4096
parts/turn. Nema 12, Size 25 std. Flange mount. Single +5VDC, or
10-30VDC power-in. Isolated Multidrop RS485 Differential outputs.
Replaces Disposable Opticals. |
MultiTurn Shaft Tracker ™
Same features as above.
Available -40 deg c to +85 deg c and Military Grade Extended
Temperature-55 deg. c. to +105 deg. c. 4 to 128 turn variations. Resolution:
up to 22 bits. |
 |
Snaptrak™ Encoders Resolution 100 to 65,536
parts/turn. Basic full function system, +12 or +15VDC power in, Buffered
5v TTL or Open Collector 5-30VDC logic outputs. All digital output
formats, BIN, BCD, Gray Code, Absolute & Incremental available. Remote
offset option.
DC Snaptrak units feature analog 0-10VDC, +-10VDC, and 4-20ma.
current loop outputs. +12 or 24VDC power in. High reliability
electromagnetic (no wear) pot replacers. 1000' long cables. Rotary
differentials available too. |
 |
Track II™ Encoders Value added system,
24VDC power in, field selectable 5, 15, or 24VDC logic level outputs.
Opto-Isolated PLC Handshake, Position status LEDs & Remote Zero-set Std.
BCD, Binary, Gray Code outputs, Incremental output option. Rotary
differentials & Limit Switch available. Resolution: 4096 parts/turn. |
 |
Synchro / Resolver Simulators Input: Up
to 18 bits digital parallel binary or 6 digits BCD, or manual 6 digit
thumwheel switches
Power: 115V 60 Hz. |
Output: 11.8V or 90V rms.
L-L 47 to 10,000 Hz capable of driving up to 25 VA loads.
Dynamic Range: .125 to
16 rps.
Display: 5 or 6 digit
.5"H LED of input or output angle.
Accuracy: +-.002,
+-.005, or +-.01 degrees.
Package: Bench mount 12"x13"x3.25"H, or Portable case 9"x12"x12"
(splash proof).
Options: Multispeed
synchro input and bus card interface. |
 |
Multiturn Absolute Encoder Systems and Readouts
Convert 1 to 1024 turns of shaft rotation input into 1,000 to 4,194,304
unique position locations. These true absolute encoders that retain
their position information forever, regardless of any motion during a
power outage. |
|
TMDS-PC Series: PC card
4.5"x6.5" & 64, 128, or 1024 turn position transducer, resolution 1024
to 16,384 parts/turn. Buffered +5VDC TTL logic, parallel binary formats,
three state & data latch control lines, separate dual data ports opt.
+12 or +15VDC power. TMSAI Series: 5
digit scaled panel mount LED readout, 9.5"Wx2.5"Hx8"D and with a size 23
Nema 12 transducer. Scaled BCD output & 16 bit binary output. 10, 36,
64, 100, 128 turns. 115VAC power.
TMRE-CIM Series: (shown)
1 million part full function readout system, 10,000 parts/turn, 100
turns full range, excellent for rack & pinion systems, adjustable datum
point, pushbutton offsets, 5-30VDC BCD outputs, 115VAC power.
TMDS Series: 2-1024
turns, resolution 100 to 65,536 per turn. Outputs optional 4, 5, or 6
digit scaled readouts, operator offset options, panel or rack mount
decoders. BCD, binary, analog, gray code, RS232/422/485 serial,
pulse-width, or bus compatible outputs, units with incremental &
absolute outputs, multi-channel systems too!
Multiturn Transducers available in: Small
size 23, heavy duty NEMA 12-4, IP65, explosion proof, water tight,
submersibles, motor tach & multiturn resolver assemblies. Radiation
resistant units to 1x109 Rads. |
 |
Low Cost Angle Indicator Input: 11.8/90V
RMS. L-L, 47 to 10,000 Hz
Ref:26/115V RMS.
Power: 115V 60 Hz. |
Output: 11.8V or 90V rms.
L-L 47 to 10,000 Hz capable of driving up to 25 VA loads.
Dynamic Range: .125 to
16 rps.
Display: 5 or 6 digit
.5"H LED of input or output angle.
Accuracy: +-.002,
+-.005, or +-.01 degrees.
Package: Bench mount 12"x13"x3.25"H, or Portable case 9"x12"x12"
(splash proof).
Options: Multispeed
synchro input and bus card interface. |
  |
ransformer Isolated Multiplexed Synchro to Digital
Converter - Series MSI Input:11.8/90V RMS. L-L 47 to
10,000 Hz, Reference 26/115V RMS., up to 128 channels
Output: 14 Bits
parallel binary or 4 decade BCD
Accuracy: +-4.6
minutes of arc +-.5LSB.. |
Package: (A) Central
Converter 2.6"x3.1"x.43"H module.
(B) Four channel input module2.6"x3.1"x.43"H module
Options: (A) Scale
Factor Choice on BCD output.
(B) Linear DC output.
(C) System mounted on PC boards or racks. |
 |
High Accuracy Synchro to Digital - Series USD
Input: 11.8/90Vrms
L-L, 47 to 10,000 Hz.Ref. 26/115V rms. (optional)
Output: 20 bits
parallel binary.
Accuracy: +-.005
Degrees.
Package: 2.6"x3.1"x.8"H
module.
Option: 6 digit BCD
output. |
 |
High Accuracy Digital to Resolver - Series UDR
Input: 18 bits
parallel binary and 26/115V 47 to 10,000 Hz reference.
Output: 7V rms., 60 or
400 Hz, capable of driving 2k ohm load.
Accuracy: +-.005
degrees.
Package: 2.6"x3.1"x.8"H
module
Option: (1) 6 Digit BCD input. (2) Separate power amplifier
modules. |
 |
Multispeed Synchro to Digital in One Module - Series SDT
Input: 11.8/90V rms.
L-L, 47 to 10,000 Hz, 26/115V rms. reference.
Speeds: 10, 16, 18,
32, 36, 64.
Output: 16 bits
parallel binary and velocity.
Accuracy: +-.01 or
+-.005 degrees.
Package: One
2.6"x3.1"x.82"H module.
Options: (A) Systems
packaged on PC cards or racks. (B) 6 Digit Display. |
 |
Miniature Synchro / Resolver to Digital - Series HSDC
Input: 18 bits
parallel binary and 26/115V 47 to 10,000 Hz reference.
Output: 7V rms., 60 or
400 Hz, capable of driving 2k ohm load.
Accuracy: +-.005
degrees.
Package: 2.6"x3.1"x.8"H
module
Option: (1) 6 Digit BCD input. (2) Separate power amplifier
modules. |
|
Miniature Synchro to Resolver
Converters (Scott T Transformers) Series ST |
 |
Input: 11.8./90V
rms. L-L, 47 to 10,000 Hz. 26/115V rms. reference. (optional)
Output: 6V or 2V rms.
Accuracy: +-1, +-2,
+-4 minutes of arc.
Package: 1.3"x1.3"x.4"H.
Compatible with all Monolithic Resolver to Digital Converters |
 |
Reference Powered Digital to Synchro / Resolver - Series
DSP Input: 14
or 12 bits parallel binary and 115V rms. reference 47 to 10,000 Hz
Output: 90V L-L 47 to
10,000 Hz capable of driving 4.5 VA.
Accuracy: +- 4 minutes
of arc.
Package: 2.6"x3.1"x.82"H.
No external transformer required. |
  |
Digital to Synchro / Resolver - Series DSC
Input: 10 to 16 bits
parallel binary and 26/115V rms. reference.
Output: 11.8/90V rms.
L-L, 47 to 10,000 Hz capable of driving 1VA, 2VA, 5VA (up to 3 TRS) or
25VA loads. |
Accuracy: 2 to 30 arc
minutes.
Package: (A)
2.6"x3.1"x.6:H module.
(B) 2.6"x3.1"x.82H module.
(C) PC card with edge connector (5VA and 25VA units) |
 |
Vector Generator - Series DVG Input: 14
or 18 bits parallel binary, Reference 10 VDC or 7 V rms.,
and power +-15 VDC
Output: +-10 VDC sine
& cosine, DC to 10,000 Hz, 2K ohms minimum load.
Reference Output: 10VDC
Accuracy : to +- 10
arc seconds.
Package: 2.6"x3.1"x.43"H
module. |
|
Option: Dynamic Vector
Rotators with programmable acceleration and deceleration. |
Contact Us!點我立即連絡! |
